Plastic Pipe Extruder/plant

Plastic Pipe Extruder/plant, HDPE/PP/ABS pipe extrusion line/machine/plant PP-R pipe production line is a new type pipe molding equipment which is manufactured on the basis of overseas advanced techniques with stable performance and high efficiency. It adopts high-hardness and grind-resistant screw bolt, rotary collect with central feeder and vacuum molding system etc. It also can be used to manufacture pipes of PE, PP,PPA,PPB etc. High performance extruders with a special screw designed for PPR extruding processMaintenance free high torque gear boxLow fusion pressure and low fusion temperatureHigh operating reliability, yielding high quality pipes continuouslyWith precision dies and advanced vacuum calibrators, excellent roundness and uniform wall-thickness of the yielded pipes availableSpeed of extruder and haul-off adjustableNC controlCan be extended to produce PE pipesPPR plastic pipe production lineAD-PPR63:1.Pipe: Φ20/63mm2.Extrusion capacity: 110kg/h3.Haul-off speed: 0.4 to 12m/min4.Nominated power capacity: 98kVA5.Dimension of the line: 40 x 2.5 x 2mAD-PPR160:1.Pipe: Φ75/160mm2.Extrusion capacity: 280kg/h3.Haul-off speed: 0.4 to 6m/min4.Nominated power capacity: 165kVA5.Dimensions of the line: 50 x 2.5 x 2mPPR pipe production line is used to produce PPR pipes for cold and hot water supply in house. The specification is from 20-160mm.1. Barrier type screw, by which the material can get good plasticizing at low temperature but high extrusion output.2. Barrel with feeding groove, material is 38CrMoAl and nitrogen treated, surface hardness is HRC 65-68, which can has a long use life.3. Millipore type mould with suitable inner compression ratio which can guarantee to produce high quality PPR pipes.4. High automatic level. The production line is controlled by PLC(touch screen)or instrument. All parts, like extruder, haul off unit, cutter etc can be controlled by touch screen synchronously.This line can also be used to produce PP-A, PP-B pipes.Main technical data: Model Applicable diameter PPR-63 20-63mm PPR-110 75-110mm PPR-160 75-160mmPPR pipe extrusion line is used to produce PPR pipes for cold and hot water supply in house. It's composed of vacuum feeding machine, hopper dryer, single screw extruder, mould, make line co-extruder, vacuum calibration and cooling tank, extended spraying cooling tank, haul off machine, printer, cutter and stack bracket.1. Barrier type screw, by which the material can get good plasticizing at low temperature but high extrusion output.2. Barrel with feeding groove, material is 38CrMoAl and nitrogen treated, surface hardness is HRC 65-68, which can has a long use life.3. Millipore type mould with suitable inner compression ratio which can guarantee to produce high quality PPR pipes.4. High automatic level. The production line is controlled by PLC(touch screen). All parts, like extruder, haul off unit; cutter etc can be controlled by touch screen synchronously.This line can also be used to produce PP-A, PP-B pipesModel PP-RG-32 PP-RG-63 PP-RL-160 Extruder Model SJ65 ×30SJ90 ×30SJ90×30 SJ25×25Produced Pipe Specification(mm)Φ20-Φ32Φ40-Φ63Φ75-Φ160Production Line Speed. m/min ≥3-12≥2-8≥1.2-6Compressed air.m3/min.0.30.30.5Cooling water flow278Total Power(kw) 72115180